Last week I made some knit skirts and used rolled hems on the bottom, which gave a nice wavy finish!
I had intended to use the rolled edge setting on my overlocker (serger) but was having problems getting my overlocker to work (later discovered I needed to change the needle!)
Anyway - since I couldn't do the rolled edge on my overlocker, I decided to try using the rolled hem foot on my sewing machine.
I found it was actually quite easy to use! Here's how:
You fold the edge of your fabric over twice to form your hem and slide this under the foot:
Then put the needle down into the hem where you want it stitched:
Lower the foot, then holding both threads at the back make 3 or 4 stitches.
Then just gently ease the hem up into the curl of the hemmer foot, and continue stitching and feeding the edge of the fabric through:
This produces a nice, neat, small hem:
If you do exactly the same but with knit fabric, the resulting hem has this nice wavy look:
Now that I have my overlocker working again, I thought I'd compare my sewing machine rolled hem with my overlocked rolled edge.
Here's both on the plain cotton fabric - the overlocked hem at the top, and the sewing machine hem on the bottom:
Then here's the difference with the knit fabric. Again the overlocked edge is at the top and the sewing machine stitched hem at the bottom.
I have to say I prefer the machine stitched rolled hem - particularly with the knit fabric, but it is slightly more fiddly to do with the sewing machine!
Do you have a rolled hem foot for your machine? Do you use it much?
I think that I'm going to try out my other machine feet this week. Having had my machine for about 8 years, I think it's about time I learnt what it can do!
I'll post over the coming days what I learn!
I'll be trying:
Blind Stitch Hemming
How well do you know what your sewing machine can do??
I'll be linking this post to many of the fabulous linky parties whose pretty buttons can be found on the bottom of this page, and whose direct links can be found on my linky party page.